Kohler KDI 1903M Kullanıcı El Kitabı - Sayfa 24

Taşınabilir Jeneratör Kohler KDI 1903M için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Kohler KDI 1903M 38 sayfaları. Diesel kdi
Ayrıca Kohler KDI 1903M için: Kullanıcı El Kitabı (40 sayfalar), Kullanıcı El Kitabı (50 sayfalar), Kullanım ve Bakım (42 sayfalar)

Sayfayı Yazdır

4.6 Check of the radiator heat-exchanger surface

NOTE: Component not necessarily supplied by KOHLER.

Important

• Wear safety goggles when using compressed air.

• The radiator heat-exchange surface must be cleaned on

both sides.

1 - Check the radiator heat-exchange surface D.

2 - Clean the surface with a brush soaked in special detergent

if it is clogged.

4.7 Rubber hoses check

The check is carried out by exerting a slight deflection or

bending along the pipe and near the hose clamps.

Components must be replaced if they have clear signs of

cracks, tears, cuts, leaks and do not retain a certain degree

of elasticity.

Important

• If hoses are damaged contact an authorized KOHLER

workshop.

1 - Check that the:

- Fuel system hoses A are intact.

- Hoses for the cooling circuit B1 and B2.

To access the control of the cooling hoses B1

unscrew the four screws E and remove the safe

guard F.

- Vent system pipes C.

- Air system ducts D.

When the control is finished the safe guard F mount and tighten

the four screws E.

Index

INFORMATION ABOUT MAINTENANCE

For safety precautions see

Danger

Cap. 2.

Fig. 4.6

Fig. 4.7

UM KDI 1903M_2504M _ cod. ED0053029500 - 2° ed_rev. 01