acaia Pearl S Kullanıcı Kılavuzu - Sayfa 7

Terazi acaia Pearl S için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. acaia Pearl S 18 sayfaları. Coffee scale
Ayrıca acaia Pearl S için: Kullanıcı Kılavuzu (20 sayfalar), Kullanıcı Kılavuzu (20 sayfalar)

Sayfayı Yazdır

Product Care Information

Battery charge

• You can charge the battery by plugging the USB cable into

any of the power supplies listed be-low:

•

A computer

•

A USB wall-charger with an output of 5 volts and 1 amp

•

A DC car-charger with an output of 5 volts and 1 amp

• It takes about 3-4 hours to fully charge the battery from

empty. Try not to let the battery completely run out before

charging. Charge the battery as needed, but try not to charge

the scale more than once a week.

• A fully charged battery can provide up to 16 hours of

working time in normal brightness and up to 40 hours in low

brightness mode.

• Battery percentage can be viewed via the Acaia apps.

* Note: Using a "fast-charging" charging block or charging hub (a charging block/hub delivering

over 5v at 1A) could damage your Acaia scale's circuit board.

Calibration

Turn on scale

Turn on the Acaia

scale.

Tap T button

Make sure the scale

is in weighing mode

and the unit is set to

'gram', then tap the

'T' button rapidly.

See CAL display

Keep tapping the 'T'

button until 'CAL' is

shown on the

display.

Place a weight

(100g/500g/1000g)

on the scale and

wait until the

display shows

'_End_'. Calibration

is now complete!