2N Telekomunikace SingleTalk Kurulum Kılavuzu - Sayfa 5
Güvenlik Sistemi 2N Telekomunikace SingleTalk için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. 2N Telekomunikace SingleTalk 12 sayfaları. Voice alarm station
Sayfayı Yazdır
Warning
Make sure that the 6-pin connection is correct to avoid product damage.
Make sure that the yellow wire is up (when viewing the audio unit).
Remove the cover from the switch. Interconnect the switch and the 2N
SingleTalk
audio unit with the cable included in the delivery.
Connect the microphone and speaker from 2N
point-switch. The speaker and microphone connectors are marked (SPK and MIC). Put
the connectors on the jumpers in the switch. The configuration is the same as in 2N
®
Lift1/ 2N
SingleTalk
the holes.
Caution
In the case of a cable version of
external microphone should be connected into the microphone input on
the cable-switch. If you do not have a cable version, this input should be
free.
(also marked on the switch board). Pull the cables through
®
®
Lift1
/ 2N
SingleTalk
®
®
2N Lift1 / 2N
®
®
Lift1
/ 2N
in the
®
SingleTalk
, an