acaia AO101 Kullanıcı Kılavuzu - Sayfa 4

Mutfak Aletleri acaia AO101 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. acaia AO101 15 sayfaları.
Ayrıca acaia AO101 için: Kullanıcı Kılavuzu (15 sayfalar)

Sayfayı Yazdır

Getting Started

Initial Setup

1. Prior to using your Orion for the first time you should rinse and clean the bean hopper in warm

soapy water. Dry immediately after cleaning.

2. Attach the bean hopper on top.

3. Place a container on the weighing platform to avoid accidental dispensing.

4. Connect the power cord to the Orion.

5. Place coffee beans into the hopper.

Getting Started

1. Make sure that the weighing platform is clean.

2. Turn on the Orion by pressing Power and place the container on the platform.

3. Set target weight by short pressing Power. Adjust values with Dial then short press Power to

confirm.

4. Press Dose to start dosing. If the display shows [ CUP ] [ rESEt ], please place a container on

the platform.

5. When a dose is complete, press Power to return to dosing.

General Operation

The Orion is designed for dosing portions of beans from 5 grams to a maximum of 3000 grams

per dose with an accuracy of +/- 2 beans (~0.5 g).

There are two dosing modes in the Orion — Manual mode and Auto mode. To choose between

modes, long press the Power button and the display will show the current mode of operation.

Rotate the dial to switch modes.

To take full advantage of the Orion Mini's many features, carefully read through the entire manual,

which contains step-by-step procedures, examples, and other information.

Warning: Incorrect handling of this product could result in personal injury or physical damage.