2seeU 2CU-HDS104 Kullanım Talimatları

DVR 2seeU 2CU-HDS104 için çevrimiçi göz atın veya pdf Kullanım Talimatları indirin. 2seeU 2CU-HDS104 2 sayfaları.
Ayrıca 2seeU 2CU-HDS104 için: Kullanım Talimatları (2 sayfalar)

Sayfayı Yazdır

OPERATING

INSTRUCTIONS

STATUS

Thank you for your purchase of this product.

Before attempting to connect or operate this

product, please read these instructions completely.

The above drawing is for reference only.

FEATURES

Support AHD Analog High Definition Camera

25FPS (PAL) / 30FPS (NTSC) each channel recording

4CH Video / 4CH Audio Input, Full 1280H*720P Recording and playback

H.264 dual-stream video compression

Support 1*RS485 / 1*SATA (Max.4T)

Support 2.0 USB memory (USB flash Disk, USB HDD, USB CD/DVD Burner, etc.)

Support RJ45 (10M/100M) Network Interface

User Friendly GUI, front panel, IR remote control and mouse

Support multiple web browsers(IE, Chrome, Firefox, Safari)

Support Admin Vision DDNS

Support 255 Channels Admin Vision CMS free

Support VGA / HDMI Video output

Support Network Protocol: PPPOE, NTP, DNS, DDNS, FTP, etc.

Easy backup method: network download to remote client

Support main mobile remote monitoring (Windows / Symbian / iPhone / iPad /

Android / BlackBerry, etc.)

Support P2P and Cloud Technology, easy to achieve a variety of network

penetration, one step to remote monitoring, getting rid of various complicated

network settings, easy and simple to operate.

Perfect circuit protection & unique triple watchdog function ensure that the

equipment never crashes.

CAUTION

DO NOT OPEN

RISK OF ELECTRIC SHOCK

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK),NO

USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The exclamation point within an equilateral triangle is intended to alert the

user to the presence of important operating and maintenance (servicing)

instructions in literature accompanying the appliance.

1.Do not attempt to disassemble the NVR device.

2.Handle the NVR with care.

3.The installation should be made by qualified service personnel or system installers.

4.Do not use strong or abrasive detergents when cleaning the NVR surface.

5.Clean the NVR surface with care.

6.Never face the NVR towards the sun.

7.Use the NVR at temperatures within –10 °C to +50 °C, and humidity below 90 %

RH and the storage temperatures should be within –20 °C to +60 °C and humidity

below 20% to 80 % RH.

8.Please operate the NVR within the specified power source ratings. Avoid connections

during a lightning storm. Otherwise, an electric shock may be caused.

Shift

Esc

SHIFT

READY

RECORD

MODEL:

2CU-HDS104

The lightning flash with arrowhead

symbol, within an equilateral

triangle, is intended to alert the user

to the presence of uninsulated

dangerous voltage within the

product's enclosure that may be

sufficient magnitude to constitute a

risk of electric shock to a person.

PACKAGE CONTENTS

1. Power Cable.......................................................................................................1PCS.

2. Power Adaptor...................................................................................................1PCS.

3. Remote Control..................................................................................................1PCS.

4. 2 Pin Wafer ........................................................................................................1PCS.

5. Operating Manual ..............................................................................................1PCS.

6. Mouse...............................................................................................................1PCS.

7. Black Sponge Washer.........................................................................................4PCS.

8. Screws ..............................................................................................................6PCS.

MAIN MENU

Main Menu

Record

Advanced

Display system statistics:Storage status; current online

users; recording bitrate.

Note: Factory default U

ser: Admin,

Set Recording Parameters, including Record Configuration, Playback and

Backup.

Set Alarm Parameters, including Motion Detect, Blind Detect, Video Loss

Detect, Exterior Alarm Detect and Output, and Abnormal Parameter Setup.

(This model does not support external alarm function)

Set System Parameters, including General Configuration, Encode, Network,

Network Service, GUI Display, PTZ Configuration, RS 232, Tour and Digital

channel parameter settings.

Set System Tools, including Storage, Account, Online User, Output Adjust,

Auto Maintain, Restore, Upgrade, Device Information, Import/Export.

Display System Statistics, including Storage Status, Current Online User, and

Recording Bitrate.

Logout the OSD menu or reset/restart the system.

OPERATING OF MAIN MENU

Record Config: configure the recording time. Choose the recording

channel; set the time length of video files and prerecord time; three types

of record mode can be selected (Schedule, Manual & Stop).

Record

Playback: search for and playback video files. Choose the channel and

date to playback videos. Through the control bar, user can control the play

pace, choose the frame and files, and edit & backup video files.

Backup: Backup the recorded files to local storage device. User can burn

the selected device or erase data for storage device.

Motion Detect: by analyzing video, when system detects sensitive

moving signal, it will start motion detect alarm. User can configure all

video detection parameters including channel, active area, sensitivity

Alarm

levels, alarm output, etc.

Video Blind: when someone viciously masks lens, the system can alert

you to guarantee video continuity. User can set parameters including

channel, active area, sensitivity levels, alarm output, etc.

Video Loss: when video loss happens, the system will give user the video

loss alarm. User can set parameters including channel, active area, alarm

output, etc.

Alarm Input: user can set parameters including channel, period, type,

alarm output, etc. (This model does not support external alarm function)

Alarm Output: three modes of alarm output including Configuration,

Manual and Stop. (This model does not support external alarm function)

Abnormality: choose event type and alarm way. When the event happens,

alarm occurs.

Alarm

System

Info

Logout

Cancel

Password: No Password