Dexin MWP103-P1MH Kullanıcı Kılavuzu - Sayfa 5

Fare Dexin MWP103-P1MH için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dexin MWP103-P1MH 12 sayfaları. Hp wireless optical mobile mouse

2. Power on the mouse.

3. Hold the mouse upside-down and use a pointed object, such as a pen tip, to click

the CONNECT button (ID button) once.

4. Click the receiver's connect button once, within 5 seconds after clicking the connect

button on the mouse. The green LED will start blinking, when the connection is

established.

Move the mouse around to test if it was successful.

5. If the synchronization is not successful for some reason please

Remove the batteries and unplug the receivers

Wait for 20 sec then to try the step 1 to 4 again

Note: * During normal use, please make sure that the mouse is no more than 3ft away

from the receiver in order to have reliable connection.

** The green LED on the receiver will light up or blink while the mouse is being used.

Operation Guide

BATTERY LOW INDICATION

When battery voltage level goes under the preset level, the blue LED on the mouse

wheel will blink frequency. Although the mouse can still work for a while, the user, at this

MWP103-P1MH HP Wireless Optical Mobile Mouse

Page 5 of 12

1.0 Edition