AvL Technologies Appendix D Arayüz ve Referans Kılavuzu - Sayfa 10

Modem AvL Technologies Appendix D için çevrimiçi göz atın veya pdf Arayüz ve Referans Kılavuzu indirin. AvL Technologies Appendix D 16 sayfaları.

Sayfayı Yazdır
Long Name
Level Type
iDirect Beam ID
1
iDirect Use Beam
1
Selection
Scan Source
1
Coarse Source
1
Fine Source
1
AvL Technologies
| Proprietary – Content is Subject to Change without Notice
iDirect Modem

Figure 7 - Target Configuration

Value Range
Value
0 - 9999
Choice
True - False
All available
Choice
signal sources
All available
Choice
signal sources
All available
Choice
signal sources
Documentation
The Beam ID the controller will set the iDirect
modem to use during acquisition if 'iDirect Use
Beam Selection' is set to 'True'
Set this switch to True to have the controller
control the Beam ID the iDirect modem will use
for acquisition
The Signal Source used to Scan for the Target
satellite. Set this to iDirect.
The Signal Source used to Coarse Peak on the
Target satellite. Set this to iDirect.
The Signal Source used to Fine Peak on the Target
satellite. Set this to iDirect.
9