AAVIX AGT310A Kullanıcı El Kitabı - Sayfa 3

Metal Dedektörü AAVIX AGT310A için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. AAVIX AGT310A 13 sayfaları. Led; 9 v

PREPARATION

ASSEMBLING THE DETECTOR

1. Unscrew the knobs on the search coil and remove the knobs

and the connector. Insert the smaller stem and align the

holes on the search coil bracket and the stem. Push the

connector through the holes, then replace and tighten the

knobs.

2. Loosen the stem's (connected with the handle) lock nut in

the direction of the arrow. Then insert the smaller stem into

the middle stem. Turn the stem's lock nut in the reverse

direction of the arrow to lock it in place.

Lock nut

3. Insert the latch on the S stem into the assembly hole on the

bottom of the control box. Then slightly push the control box

in the direction of IN on the handle to ﬁx the latch in place.