AAVIX AGT1320 Kullanıcı El Kitabı - Sayfa 4
Çim Biçme Makinesi AAVIX AGT1320 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. AAVIX AGT1320 13 sayfaları. 21” lawn mower
Sayfayı Yazdır
Product Specification
Component
Rated Power
Rated Speed
Displacement
Cutting Width
Height Adjustment
Wheels
Machine Weight
Safety & Instruction Decals
Important:
Safety & instruction decals are located near
areas of potential DANGER. Replace damaged decals.
1. WARNING: Read the Operator's Manual.
2. Thrown Object Hazard: Keep bystanders a safe distance
from the mower.
3. Cutting/Dismemberment Hazard of Hand or Foot, Mower
Blade: Disconnect the spark plug wire and read the
instructions before servicing or performing maintenance.
4. Cutting/Dismemberment Hazard of Hand or Foot, Mower
Blade: Stay away from all moving parts and keep all
guards and shields in place.
5. Cutting/Dismemberment Hazard of Hand or Foot, Mower
Blade: Do not mow up and down slopes, only mow
across; stop the mower and engine, pick up debris before
operating; look behind and down before reversing.
Setup
Important:
Remove and discard the protective plastic
sheet that covers the engine.
1. Unfolding the Handle
Folding or unfolding the handle improperly can
damage the cables, causing an unsafe operating
condition.
• Do not damage the cables when folding or unfolding
the handle.
• If a cable is damaged, Contact an Authorized Service
Center by calling 1-866-591-8921.
Specification
3600w/5HP
3000RPM
159cc
20"
1.75"-3.75"
7" Front 12" Rear
66.2 lbs
1. Remove the handle knobs from the mower housing.
(Figure 2)
Important: Route the cables to the outside of the handle as
you install the handle.
1. Handle knob (2)
2. Move the handle to the operating position.
3. Install and tighten the handle knobs that you removed
in step 1. (Figure 2)
2. Filling the Engine with Oil
Your mower does not come with oil in the engine, but it
does come with a bottle of oil.
1. Remove the dipstick. (Figure 3)
2. Slowly pour oil into the oil deposit until the oil level
reaches the full line on the dipstick. (Figure 4) Do not
overfill. (Max 20oz. (0.59 L), type: SAE 30 detergent
oil with an API service of SF, SG, SH, SJ, SL, or higher.)
Note:
If you overfill the engine, pour some oil out of it as
directed in Changing the Oil.
3. Install the dipstick securely.
Important:
Change the engine oil after the first 5
operating hours; change it yearly thereafter. Refer to
Changing Engine Oil.
3
Figure 2
Figure 3