Aqua Control SELECT Series 2 Kullanım Kılavuzu - Sayfa 12

Çim ve Bahçe Ekipmanları Aqua Control SELECT Series 2 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Aqua Control SELECT Series 2 19 sayfaları. Display aerator

Sayfayı Yazdır
Diagram 1 below shows the optimum floating depth for an Aqua Control Unit. The shaded area of the diagram shows the least amount of float and
nozzle possible. The chart shows the amount of weight that needs to be added to sink the unit to the optimum depth. This is an optional step. The unit
will operate just the same without adding any weights, but more of the float will be showing. The only time weight has to be added is to sink the unit far
enough for the lights to be 2" underwater while operating. Remember that the unit must be running to decide how much weight has to be added. If you
add weights to float at the optimum depth while the unit is off, the thrust of the nozzle could sink the unit.
After turning the unit on, estimate the floating depth from diagram 1 below. Look on the chart to determine the amount of weight that needs to be added.
The chart also gives recommended combinations of weights to accomplish the desired weight.
Attach the weights to the top of the float using the hardware provided in the float hardware package. There are (6) six 2 ¼" long bolts with a 1" diameter
flat washer and a hex nut on each bolt. Slide the flat washer up to the head of the bolt and put the threaded end of the bolt through the center of the weight.
Thread the bolt into any open insert on the top side of the float. The 1" diameter flat washer keeps the weight from sliding off the bolt. The weights must
be distributed evenly around the float to keep it floating level.
DEPTH
TOTAL
WHEN
WEIGHT
RUNNING
REQUIRED
DEPTH 1
15 lbs.
DEPTH 2
20 lbs.
DEPTH 3
30 lbs.
DEPTH 4
40 lbs.
DEPTH 5
55 lbs.
12
FLOTATION
SELECT SERIES 2
FLOAT VS. WEIGHT
2
-
10
-
-
-
1 in.
2 in.
1.85 in.
1/2 in.
2 in.
DIAGRAM 1
Aqua Control, Inc. 60 Hz. Select Series 2 Instruction Manual
NUMBER OF WEIGHTS
3
5
-
10
2x10 + 2x5
-
-
TOP OF FLOAT
DEPTH 1
DEPTH 2
DEPTH 3
DEPTH 4
DEPTH 5
4
6
-
-
5
-
5
10
-
-
4x10 + 2x7.5
WEIGHT PIN
(BARBELL)
WEIGHT
DIAGRAM 2