AVLink HDMI-RN Kullanıcı Kılavuzu - Sayfa 4

Genişletici AVLink HDMI-RN için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AVLink HDMI-RN 6 sayfaları. Local/remote

Installation

1. Turn off the DVD and HDTV.

2. Connect the HDMI extension cable between the DVD and the "HDMI In" port of HDMI-LN.

3. Connect the HDMI extension cable between the HDTV and the "HDMI Out" port of HDMI-RN.

4. Connect the CAT.5 cables between the HDMI-LN "CAT.5" port and the HDMI-RN "CAT.5" port

of extender.

5. Connect the power cord and turn on the extender.

6. Turn on the DVD and HDTV.

IR-BOX Directions:

Put it into the HDMI-RN "EXT. IR" port and place the IR-BOX, so that you can point to it easily

with your IR remote controller.

IR BLASTER Directions:

Plug IR blaster plug into HDMI-LN "IRBLASTER" port, It sits in front of the DVD receiver's IR

sensor, which is located on the front-panel.

Select any additional options you may require.

1. IR-BOX

GND

Sig

2. IR BLASTER

P+

N-