AVLink IAA-22 Kullanıcı Kılavuzu - Sayfa 12
Medya Dönüştürücü AVLink IAA-22 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AVLink IAA-22 18 sayfaları. Tv walls, 2x2, irregular splicing
Sayfayı YazdırCHAPTER 5 FRONT/REAR PANELS
5.1 Front Panel
The IAA-22 supports 8 clear LED indicators designed for device status.
▪ HDMI IN1/IN2 LED indicator: Specified for the status of plugging HDMI connector into
input port, if the LED is extinguished, it means that the quality of HDMI is not good.
▪ HDMI OUT1/OUT2 indicator: Specified for the status of plugging HDMI connector into
output port, if the LED is extinguished, it means that the quality of HDMI is not good.
▪ HDCP1/HDCP2 indicator: Specified for the HDCP function is enabled or disabled. If
the LED is extinguished, it means that the HDCP function is disabled, if the LED is
blinking, it means that the HDCP processing is error.
▪ STA0 indicator: Specified for the connection status between IAA-22 and computer.
Once the connection is successfully and the PC tool is enabled, the LED will bright.
▪ STA1 indicator: Specified for the firmware upgrade. If the LED is blinking, it means
that the firmware is upgrading. After finishing firmware upgrade, the LED is
extinguished.
Figure 5-1: IAA-22 Front Panel
9
I
A
A
-
2
2
I
A
A
-
2
2
I
A
A
-
2
2