AVLink MaitreView 4KLite Hızlı Başlangıç Kılavuzu - Sayfa 8

Anahtar AVLink MaitreView 4KLite için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. AVLink MaitreView 4KLite 11 sayfaları.

INSTALLATION

Note: please turn the power off for your displays and video sources before you begin the installation.

1. Turn the device to the back, connect each video source to the input ports respectively.

2. Connect each display to the output ports respectively.

3. Connect the power adapter to the DC 12V power port, and locking the DC power jack. The LED will turn blue after

connected successfully.

4. Once step1~3 is completed, please turn the device to the front and turn the power on for displays and video sources.

5. Power on your device: on your front panel, press the POWER button once, the blue LED will start to blink for around

30 seconds.

6. After the LED turn green, then the device is ready to use.

7. Power off your device: when you wish to turn off the power, please long press the POWER button for around 3

seconds, the LED will blink in blue for around 20 seconds, and then the device will shut down itself.

Single view allows user to output a single region from any of the HDMI IN 1~4 channels, you can

press from 1~ 4 on output 1 or output 2. To do this you need to:

Layouts

Layout button allows user to choose any of the 6 layouts to show on Output 1 or Output 2. To do this

you need to:

MAITREVIEW 4KLITE QUICK START GUIDE

Press any of input 1~4 on SingleView

Press 1~4 to choose one region layout from input source 1~4 to display on Output 1 or Output

2, for example press

Output 2

Select the layout from either of the 6 layouts pattern

Select layout by press the button next to the layout icon you wish to use, for example, press

once on layout section, then layout

Press more than once, it will rotate clockwise

on Output 2, then single view displays selected input on full screen in

will show on Output 2



Region Input