Aqua Creek F-043SCH Talimatlar Kılavuzu - Sayfa 4

Kaldırma Sistemleri Aqua Creek F-043SCH için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Aqua Creek F-043SCH 14 sayfaları. 24v patriot patient pool lift solar charger

Sayfayı Yazdır

Patriot Solar Charger Installation

1/4" NYLOCK NUT (6)

MOUNTING BRACKET (4)

1/4" FLAT WASHER (12)

1/4" X 2-1/2" HEX BOLT (6)

RUBBER THREAD CAP

To install the Solar Charger on a Patriot lift;

STEP 1: Put the lift in operation mode on the pool deck.

STEP 2: Find the RUBBER THREAD CAP and install over the mounting stud.

STEP 3: Using the MOUNTING BRACKETS (4) and supplied hardware, attach the Solar Charger to the

handle as shown above. Tighten hardware with 7/16" wrenches or sockets until snug. The Solar Charger

should be solid and stable when the brackets are fully installed.

STEP 4: Run the BATTERY CABLE behind the main frame and up the ACTUATOR FRAME. The CONNECTOR

is on the CONTROL BOX (see INSTALLING THE CHARGE CONNECTOR).

NOTE: THE BATTERY CABLE

RUNS ALONG THE MAIN FRAME

AND UP THE ACTUATOR FRAME

SO IT MOVES UP & DOWN WITH

THE LIFT.

ACTUATOR

FRAME

TIGHTEN BOLTS

& NUTS WITH

7/16" WRENCHES

MAIN FRAME

BATTERY CABLE RUNS

BEHIND MAIN FRAME &

UP ACTUATOR FRAME

BEHIND CONTROL BOX

Revised 12/13/16