Aqua Creek PATRIOT PORTABLE LIFT Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 12
Kaldırma Sistemleri Aqua Creek PATRIOT PORTABLE LIFT için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. Aqua Creek PATRIOT PORTABLE LIFT 17 sayfaları.
Sayfayı YazdırIf the battery is fully charged and the lift is not moving then:
2. Check all cords:
A. Check that the cords are properly plugged in. Start by unplugging the
remote and the actuator cord from the control box. Once these cords
are removed check the ends for corrosion or damage. Plug the remote
cord back in by lining up the raised tab on the plug to the grooved line
on the control box outlet. Note that these cords require some force to
plug them in fully. You will know they a correctly inserted when you
h e r e a " p o p p i n g s o u n d " . T h e c o r d s w i l l b e r e c e s s e d i n t o t h e o u t l e t . I f
they are flush with the outside of the outlet they are not plugged in
fully and the lift will not function. Make sure you do this for both
cords.
NOT inserted fully.
I f y o u h a v e c h e c k e d a l l t h e c o r d s a n d t h e l i f t s t i l l d o e s n ' t mo v e :
3. Check the contact points:
A. After you have fully charged the battery and checked the cords to
make sure they are properly plugged in, check to make sure the contact
points are not corroded or bent. If the contact points are corroded take
some rubbing alcohol and a q-tip and clean off the points. After
cleaning the contact points it is recommended to put some dielectric
grease on the contact points (terminals) to help ensure good electrical
contact and prevent corrosion. Then reinstall the battery on top of the
c o n t r o l b o x . Ma k e s u r e y o u h e a r a " c l i c k " , w h i c h i n d i c a t es that the
battery is correctly seated. The lift will not work if the battery is not
seated correctly.
Silver tabs are the contact
(terminal) points.
Fully inserted.
12