Aqua Creek Pro Pool-AT Talimatlar Kılavuzu - Sayfa 8

Kaldırma Sistemleri Aqua Creek Pro Pool-AT için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Aqua Creek Pro Pool-AT 14 sayfaları. Pool lift

Sayfayı Yazdır

1. Attach seat belt to the seat.

2. Install the Pro Pool-AT pool lift onto the four (4)

anchors using the supplied 1/2 inch x 1 1/2 inches

stainless steel hex-head bolts and 1/2 inch stainless steel

flat washers. Make sure all bolts are tight before using

the lift.

SEE FIGURE E

3. Before installing the battery, place it on the charging

unit and let it charge for 24 hours. Make sure the orange

"charge" light illuminates when the battery is being

charged.

4. Remove the fully charged battery from the charger,

grease the terminals, and install it on top of the control

box. The battery will line up with the control box, and

will 'click' when it properly locks in place. The lift will only

operate when the battery is correctly mounted.

WHEN NOT IN USE, STORE THE

BATTERY ON THE CHARGER!

Pro Pool-AT Assembly Instructions

SEE FIGURE D

ATTACH

FULLY-CHARGED

BATTERY

CONTROL BOX

1/2" X 1-1/2"

HEX BOLT (4)

1/2" FLAT

WASHER (4)

ANCHORS (4)

INSTALLED FLUSH

W/DECK SURFACE

LOOP ON TOP

FOR EASY ACCESS

THREAD THROUGH

FIGURE D

SLOTS AND PINCH

TOGETHER TO HOLD

HANDSET

PLUGS INTO

CONTROL BOX

FIGURE E

Revised 1/5/17

POOL

WALL