Avlite AV-BSBL Hızlı Başlangıç Kılavuzu

Aydınlatma Ekipmanları Avlite AV-BSBL için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Avlite AV-BSBL 4 sayfaları.

Quick Start Guide

AV-BSBL

Your system will consist of: 1 x Folding Steady Burning Barrette, 2 x Stanchions (or Support Pole),

2 x 2 in. Stainless Couplings, 2 x Mounting Caps, 8 x Ground Stakes, 4 x 12 ft. Line (Single Loop),

4 x 14 in. Line (Double Loop), 4 x Cam Clips

Required Tools: Mallet (User Supplied)

Double Loop Line

with Cam Clip

Single

Loop Line

Step 1: Gather All Components

Lay all the parts on the ground in preparation for

assembly.

Step 3: Straighten the Barrette

Straighten the barrette until it is fully extended.

b. Secure the two latches.

For the full manual, visit the link below:

avlite.com/product/barrette-steady-burning-light-av-bsbl/

Thank you for purchasing this product. This guide will

provide you with a brief summary of the steps involved in

deploying the Folding Steady Burning Barrette with tie-down

installation.

Folding Barrette

Mounting Cap

U-Bolt

Ground Stake

Step 2: Open Barrette Latch

b. Unfold the Barrette.

Step 4: Install Mounting Cap

b. Flip barrette over.

d. Place (4) flat washers over U-bolts and thread (4)

Lift the handle of the butterfly latch to unlock.

Slide two U-bolts onto barrette between the first

and second light head.

With flat side down, align the mounting cap

holes with the U-bolt. Ensure the arrow on

mounting cap is pointing towards the lights.

hex nuts until fingertight.

Thread coupling onto mounting cap.

Repeat on other end.

Coupling

Mounting Cap

U-Bolt