Avlite AV-OL-CMI Kurulum ve Servis Kılavuzu - Sayfa 15
Aydınlatma Ekipmanları Avlite AV-OL-CMI için çevrimiçi göz atın veya pdf Kurulum ve Servis Kılavuzu indirin. Avlite AV-OL-CMI 20 sayfaları. Combined medium intensity obstruction light
Sayfayı Yazdır
8.0 IR Remote Control
Test Mode / Configure
Pressing the T/C button for up to 5 seconds places the light in Test Mode. The light will flash once in response to the
T/C button being pressed and then turn off.
Normal Operation
The light will return to normal operation once it has not detected a valid key press for 30 seconds. The light will flash
once to indicate it is returning to normal operation.
Read
Pressing the Read followed by one of the configuration keys shall cause the light to flash the configured value.
Example Key Sequences:
R
B
T/C
R
L
T/C
I
R
B
T/C
Operational Mode
The light has three modes of operation: Always on, Standby Mode and Dusk-to-Dawn mode. These modes are
selected via the IR remote control.
In Always On mode, the daylight sensor is disabled and the lantern will remain ON.
In Standby mode, the lantern is turned off and the daylight sensor is disabled.
In Dusk-to-Dawn, the daylight sensor is enabled.
R
T/C
B
I
B
I
1
T/C
B
I
2
T/C
B
I
3
T/C
T/C
The light flashes the current battery status.
The light flashes the sunset level in Lux, followed by a 2 second gap, followed by the
sunrise level. Levels are in the range of 1 to 9.
The light flashes the Operational Mode. Modes are as follows:
1 flash = Always-On
2 flashes = Standby
3 flashes = Dusk-to-Dawn
Read Operation mode
Always on mode
Standby mode
Dusk-to-Dawn mode
Want the latest product information?
Visit
www.avlite.com
15