ab CryptoBox 702T mini Kullanıcı Kılavuzu - Sayfa 10

Alıcı ab CryptoBox 702T mini için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ab CryptoBox 702T mini 20 sayfaları. Hd terrestrial receiver

Sayfayı Yazdır

Tip: You can set all the settings here by pressing ◄/►button.

1. Menu Language: Set the menu language.

2. Audio1: Set the preferred audio language.

3. Audio2: Set the sub-prime audio language.

4.Subtitle Language: Set the subtitle language.

5.Subtitle Control: IF you set ON, it

will auto load subtitle.

6.EPG Language: Set the EPG

language.

7.TXT Language: Set the TXT

language.

8. LCN: You can turn LCN on or off.

(Logical Sorting), If you set ON, the

programs you search will be sorted

in the order they were set; if you select off, the programs will be sorted

automatically.

9.Digital Audio: If a channel has RAW and PCM audio language at the same

time, when you select RAW it will set AC3 audio language as default output and

when you select PCM it will set PCM audio language as default output.

10. Auto Channel Selection: If you set ON, in the channel list will play

automatically when you highlight the channel. If you set OFF, in the channel list

when you highlight the channel, you should press the OK button to play it.

11. Auto Exit CH List: If you set ON, the channel list will disappear when you

press OK on a Highlighted channel. If you set OFF, the channel list will

disappear when you press OK on a playing channel.

12. Source Signal Type:Set the DVB-T/T2 signal type.

13. Recall List: You can turn Recall List on or off. If you set ON, when you

press Recall button of RCU you can get the recall list. If you set OFF, when you

press recall button you can go back to the last program you have selected.

14. Low Power Standby: You can set on or off. If you set on, the machine

enters the standby state for true standby.

15.Standby Time: You can turn on or off. Set to ON, the front panel display

time when standby

16. Front Panel Light: Set the brightness of the LED.

17. Front Panel Display: You can select Channel Number or Clock. If you set