Aqua Creek F-TWPB Montaj Talimatları Kılavuzu - Sayfa 7

Fitness Ekipmanları Aqua Creek F-TWPB için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Aqua Creek F-TWPB 14 sayfaları. Available in pink, green or yellow patent pending 300 lb. (136 kg) maximum weight capacity
Ayrıca Aqua Creek F-TWPB için: Manuel (15 sayfalar)

Sayfayı Yazdır

The Tidalwave Pool Bike was designed for use in and out of the water. To use in water, use the wheels at

the front of the bike to roll the bike down the pool wall into the water. Optimal water depth is 3-5 feet

(0.9 to 1.5 meters). See FIG. 9 & FIG. 10 below.

FIGURE 9

The Tidalwave pool bike comes with multiple levels of resistance, similar to a stationary bike. The

resistance adjustment knob is located on the main frame. To increase resistance for a harder workout,

turn the knob clockwise. To decrease resistance, turn the knob counter-clockwise. See FIG. 11 and

FIG. 12 below.

NOTE: Always begin pedaling on the easiest level and increase resistance to more diﬃ cult settings

while pedaling. Never start pedaling at high resistance as you may experience a transmission bind

up. However, if this does occur, release the resistance back to easy and begin again.

RESISTANCE

ADJUSTMENT

ROD

Tidalwave Operating Instructions

PLACE IN WATER

RESISTANCE

ADJUSTMENT

KNOB

FIGURE 11

FIGURE 10

ROTATE TO

INCREASE

RESISTANCE

*Frame not shown for clarity

ROTATE TO

DECREASE

RESISTANCE

FIGURE 12

Revised 2/4/16