Avlite AV-HLI2 Kurulum ve Servis Kılavuzu - Sayfa 10
Fener Avlite AV-HLI2 için çevrimiçi göz atın veya pdf Kurulum ve Servis Kılavuzu indirin. Avlite AV-HLI2 16 sayfaları. Inset heliport light
Ayrıca Avlite AV-HLI2 için: Kurulum ve Servis Kılavuzu (12 sayfalar)
Sayfayı Yazdır
7.0 Unpacking, Installation, Wiring and
Setup
7.1 Unpacking
Unpack all hardware and inspect for damage. If there is any damage, please contact your
Avlite Office.
Retain original packing material for possible future use in shipping.
7.2 Installation
WARNING:
DO NOT connect directly to the DC output of a generator, or any
other unregulated power source. Connecting to an unregulated
source may result in damage.
WARNING:
Do not stare into light emitting diode (LED) beams.
7.2.1 Tools Required
Tools Needed (not supplied)
5mm Allen Key
7.2.2 Location
Refer to your regional specifications for site requirements for heliport lights.
7.2.3 Cabling Requirements
The minimum cable requirements are set out in the relevant AV-HL-CTRL Installation and
Service Manual.
10