ab ComPilot Hızlı Kılavuz - Sayfa 4

İşitme Cihazı ab ComPilot için çevrimiçi göz atın veya pdf Hızlı Kılavuz indirin. ab ComPilot 4 sayfaları. Hearing aid accessory

Using the ComPilot as a Remote Control

To use the ComPilot as a remote control, it must be configured with your Naída CI processor(s) by your audiologist.

Once configured by your audiologist, the ComPilot will not communicate with a compatible Phonak

hearing instrument.

The paired ComPilot can change the volume or program setting of your Naída CI processor(s). If you are a

bilateral recipient, the ComPilot will change the volume/program on both paired processors simultaneously.

a) There are two ways to use the ComPilot as a remote control:

I. Worn around the neck with both ends of the neckloop attached to the ComPilot.

II. Handheld with the neckloop completely disconnected.

Note: No streaming is possible in this configuration.

b) To change volume, press the (+) or (–) buttons to increase and decrease the volume.

c) To toggle forward through your programs, use the main button or quickly press the ComPilot Home button.

d) To return to program 1 with default volume settings, press and hold the Home button for longer than two seconds.

Other ComPilot Applications

Using the ComPilot to Watch TV

The ComPilot can be used for optimum television audio quality. For this we recommend purchasing the Phonak

TVLink S. Simply set-up the TVLink according to the instructions included within its package. The TVLink uses

Bluetooth pairing to stream audio directly to your ComPilot.

Using the ComPilot with a Remote Microphone

The ComPilot can be used with a remote microphone. For this, we recommend purchasing the Phonak RemoteMic.

The RemoteMic will stream the speaker's voice directly to your ComPilot using Bluetooth technology. This enables

you to hear the speaker from farther away and more clearly in noisy environments.

For further information on the ComPilot or Naída CI technology, please visit AdvancedBionics.com

028-M196-03-RevB