Avlite AV-70 Hızlı Başlangıç Kılavuzu

GPS Avlite AV-70 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Avlite AV-70 2 sayfaları. Aviation light
Ayrıca Avlite AV-70 için: Manuel (16 sayfalar)

Sayfayı Yazdır

Quick Start Guide

AV-70 Aviation Light

This Quick Start Guide provides a summary of installation steps for the AV-70 Solar Aviation Light. A thorough review

of the Installation and Service Manual is recommended prior to installation.

Note: The AV-70 can be operated as a solar or AC powered airfield light. Lights can be operated without cabling,

using solar power. Cables can be used for sustained operations (greater than 20 hours), in conditions of low sunlight

and/or low temperature.

Before installation, ensure that applicable power systems have been installed if required by your specific ligthing

system installation

If required, please consult the AvMesh

What Installation Parts will you need?

Mounting Tile (if required)

Large Washers

Quick Release Pins - Long (for tile mounting only)

Frangible Concrete Mount (if required)

Frangible Stake Mount (if required)

Step 1: Remove Bung

Using a bung tool, remove the bung from the bottom

of the light base.

Note: There is a sealed vent on base which allows air

transfer without moisture intake. Do not disturb.

Step 2: Charge the battery

New lights should be left in the sun for several days

to ensure the battery is charged before placing in

service.

For the full manual, visit the link below:

avlite.com/product/aviation-and-taxiway-light-faa-and-icao-av-70

Thank you for purchasing this product. This guide will

provide you with a brief summary of the steps involved in

deploying the AV-70

RF Communications Manual and Quick Start Guide to program light groups.

Step 3: Activate Light

Set internal toggle switch to ON. Replace bung in light

base. Alternatively flick the external switch to 'ON' if

fitted

Note: Power and range settings are factory-set

by Avlite to comply with regulatory or customer

requirements.