Aqua Creek Products F-802SC2 Manuel - Sayfa 11
Kaldırma Sistemleri Aqua Creek Products F-802SC2 için çevrimiçi göz atın veya pdf Manuel indirin. Aqua Creek Products F-802SC2 16 sayfaları. Lift graph
Ayrıca Aqua Creek Products F-802SC2 için: Manuel (2 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar)
Sayfayı Yazdır- 1. Page Description
- 1. Anchor Installation: Core-Drill Retro-Fit
- 1. Anchor Installation: Saw-Cut Retro-Fit
- 1. Scout 2 Lift Assembly Instructions
- 1. 6 Actuator
- 2. 2 Scout 2 Components
- 2. Table of Contents
- 2. 24 V Battery
- 2. Battery Test Cable Instructions
- 2. Proper Care of Pool & Spa Lifts
- 2. Scout 2 Parts List
- 2. Seat Assembly Parts List
WARNING! DO NOT ATTEMPT TO DIRECTLY PROBE THE BATTERY CONNECTOR TO TEST VOLTAGE.
THIS MAY CAUSE PERMANENT DAMAGE TO THE BATTERY! USE THE SUPPLIED BATTERY TEST CABLE
ONLY FOR CHECKING THE BATTERY VOLTAGE!
The Aqua Creek 24V battery has a cable and connector for connecting to the control box or to the
battery charger. The battery connector is not suitable to check the battery voltage, as it is very hard
to probe the connector without shorting-out the battery, which will cause damage. For this reason,
a separate battery test cable is provided. To safely check the battery voltage, use a voltmeter or
multimeter with standard test probes, and insert the probes into the test cable as shown below.
Copyright © 2017 Aqua Creek Products All Rights Reserved
Battery Test Cable Instructions
CHECK VOLTAGE
24V BATTERY
BATTERY
CONNECTOR
MALE
CONNECTOR
BATTERY
TEST
CABLE
INSERT TEST
PROBES TO
11
Revised 5/9/17