Aqua Creek Products F-MTY400-C Manuel - Sayfa 6

Aydınlatma Ekipmanları Aqua Creek Products F-MTY400-C için çevrimiçi göz atın veya pdf Manuel indirin. Aqua Creek Products F-MTY400-C 13 sayfaları.

THE AQUA CREEK FOOTREST ASSEMBLY IS DESIGNED TO FIT UNDER THE SEAT AND

IS INSTALLED INSIDE THE 2" SQUARE TUBING THAT SUPPORTS THE SEAT FROM

UNDERNEATH. TO INSTALL THE FOOTREST;

INSERT THE FOOTREST ASSEMBLY INTO THE 2"X2" SQUARE

TUBING THAT SUPPORTS THE SEAT UNTIL THE PLASTIC INSERT

OF THE FOOTREST ASSEMBLY SITS FLUSH AGAINTS THE END OF

THE 2"X2" TUBE. USING THE SUPPLIED 1/4" HARDWARE,

FASTEN THE LEGREST ASSEMBLY TO THE 2"X2" TUBING.

DETAIL A

SCALE 1 : 4

WF - 1/4" FLAT WASHER

WL - 1/4" LOCK WASHER

KNOB - 3/4" KNURLED - 1/4-20 x 3/4"

REMOVE THE FULLY CHARGED BATTERY FROM THE

CHARGER AND INSTALL THE BATTERY TO THE CONTROL

BRACKET, ON TOP OF THE CONTROL BOX. ONCE SECURE,

CONNECT THE BATTERY CABLE TO THE CONTROL BOX

CABLE. THE LIFT WILL ONLY OPERATE WHEN THE

BATTERY IS CONNECTED PROPERLY.

WHEN THE LIFT IS NOT IN SERVICE, STORE BATTERY ON

THE CHARGER!

WITH THE LIFT FULLY ASSEMBLED AND ANCHORED,

RUN THE LIFT COMPLETELY OUT AND BACK IN 3 TO 5

TIMES, WITHOUT WEIGHT, FOR THE LIFTS "BREAK IN"

CYCLE PERIOD.

CONGRATULATIONS, YOUR LIFT

IS NOW READY FOR USE!

DETAIL B

SCALE 1 : 3

MIGHTY 400 - BLUE

CATALOG NO. F-MTY400

DETAIL C

SCALE 1 : 3

DO NOT UNPLUG

REMOTE

ACTUATOR

MOTOR

9/28/2022 1:39:29 PM PAGE - 6