Aqua Creek Products F-013BAC Manuel - Sayfa 7

Hareketlilik Yardımı Aqua Creek Products F-013BAC için çevrimiçi göz atın veya pdf Manuel indirin. Aqua Creek Products F-013BAC 8 sayfaları. Beach access chairs

Sayfayı Yazdır

Disassembly F-014BAC

1) Remove the swivel wheels in back. (This contains the wheel itself, along with the PVC pipe housing

that allows it to swivel). It is all one piece. Take two D ring pins out for each swivel. Then tap on the top of

the elbow until swivel part disconnects from chair. Do the same for both swivels

2) Take the two D ring pins off to remove the 2 large wheels.

3) To remove further, take the top set of pins (2 front & 2 back) under the seat area out. Once these 4 pins

are removed the top part of the frame (seat part of chair) will separate from the bottom section. Bottom

section consists of everything below the seat frame. Use a rubber mallet to separate the sections.

Revised 4/30/15