AVM INSPIRATION CS 2.2 Kullanım Talimatları Kılavuzu - Sayfa 15

Amplifikatör AVM INSPIRATION CS 2.2 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. AVM INSPIRATION CS 2.2 20 sayfaları. Compact streaming cd-receiver

Sayfayı Yazdır

NOTE: Before you can use your RC 9 remote control to switch on your device, both components need

to be paired (for more information on the pairing process please refer to section 4.4.5).

4.2 Colour display

The colour display divided into three sections in any operating mode:

Header section: In the header section the current control area is shown (e.g. source, system,

internet radio etc.). On the right-hand side is the charging status of the integrated lithium-ion

battery (for an explanation of the charging status symbols please refer to section 1.8.1)

Content section: The content section is the central user interface of your RC 9 remote control

where both menu points of the currently accessed control area and grafical user elements are

being showed.

Footer section: In the upper part of the footer section you can both find the actual time and

informatin on the current connection statuss. The lower part of the footer section is divided into

four parts which can be assigned with socalled Hotkeys (please refer to sections 4.3 and 4.4.4

for detailed information on Hotkeys).

4.3 Hotkeys

The four hotkeys (4) offer direct access to a total of four devices of a currently active zone. All four

devices can be directly accessed from the lower part of the footer section. For details and an

explanation of the term "zone" please refer to section 4.4.2.

4.4 System Settings

To access the System Settings menu please press the Settings key (9). The following menu points can

be selected via the four Navigation keys (11) and the Enter key (10): "Device Selection", "Change

Zone", "System Information", "User Settings", "Start Pairing".

4.4.1 Device Selection

Under the menu "Device Selection" you can find all available and recently paired devices with their

resepective names. Wih the navigation keys (11) please choose one of the devices from the list and

confirm with the Enter key (10). The menu point "Device Selection" is also shown when the RC 9

remote control is waking up from standby mode and hasn't already been connected with a device.

NOTE: Please note that only one device can be controlled by the RC 9 remote control at a time. If you

happen to choose another device, the connection to the formerly linked device will be interrupted.

4.4.2 Change zone

If you have multiple devices which can be controlled with the RC 9 remote control, you can group

those devices into several zones such as different rooms or appliance combinations. The "Change

Zone" option allows you to switch between different zones and is also available via the Zone menu (7).

Each zone is provided with four assignable Hotkeys (4) for a direct access to its four associated

devices (see 4.4.4 and 4.3).

4.4.3 System Information

The menu item "System Information" contains information on technical details of your RC 9 remote

control such as the current firmware version, serial number and more. Furthermore, the firmware of the

RC 9 remote control can be easily updated by pressing the red Option key (5). Please note that the RC

9 remote control needs a direct USB connection with a personal computer in order to conduct the

update process.