AVM OVATION A 6.2 Kullanım Talimatları Kılavuzu - Sayfa 9

Amplifikatör AVM OVATION A 6.2 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. AVM OVATION A 6.2 14 sayfaları.

3 Advanced Settings

Your OVATION A 6.2 offers a wealth of custom specific settings in its advanced settings

menu. To enter the menu just tap on the button MENU (4c). The button now changes to

EXIT. A second tip on this button leads you to the normal operating mode. When the menu

system is active you can select the desired function using the buttons < ITEM > (4a, 4b). The

setting is done using the buttons < VALUE > (4d, 4e).

Depending on the actual source the advanced settings menu offers a range of selected

settings described in the following.

3.1.1 Tone Control

Set tone control activates or deactivates the integrated sound settings menu of the A 6.2

which enables you to individually adjust the bass or treble level of a certain sound source or

lets you choose from a range of available loudness curves.

Set tone control can be bypassed (BYPASS) or activated (ACTIVE). In case the set tone

control option is activated TONE ON is shown in the display (5), otherwise LINEAR. When

switched to ACTIVE the sound settings menu is ready to operate but will only be enabled if

one of the associated parameters such as set bass, set treble or set loudness is being

altered. In case all three parameters are in a neutral position (BASS = 0, TREBLE= 0,

COUNTOUR = OFF) the set tone control option remains ready for operation without

processing the signal. You can choose if you want to change bass and treble settings

simultaneously for all inputs (GLOBAL) or exclusively for the currently selected input

(INDIVIDUAL). If you wish to set individual settings, a prior parameterization of the respective

sound sources is required first (see 3.2). The loudness option depends on speakers and

properties of the listening room and is therefore always GLOBAL.

NOTE: In case tone control is set to BYPASS the menu will skip the set bass, set treble and

set loudness settings.

3.1.2 Set bass

Set the bass level between – 7 dB and + 7dB. If a global sound setting is chosen (see 3.1.1),

GLOBAL is shown in the display – otherwise INDIVIDUAL.

3.1.3 Set treble

Set the treble level between – 7 dB and + 7dB. If a global sound setting is chosen (see 3.1.1),

GLOBAL is shown in the display – otherwise INDIVIDUAL.