AVM PA 30.3 Kullanım Talimatları Kılavuzu - Sayfa 12

Amplifikatör AVM PA 30.3 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. AVM PA 30.3 20 sayfaları.

Please note the following if the remote control does not work properly: Always hold the remote

control with the front end facing the device you want to operate. If the remote control is placed

too far away from the device to be controlled, or if the batteries are dead or objects are placed

between the remote control and the device to be controlled, the remote control may not

function properly.

1.14.1 Battery replacement

Bottom of the RC 3 remote control

If the range of the remote control decreases significantly, new batteries must be installed.

Remove the six screws on the bottom of the remote control marked with arrows (ATTENTION:

do not open the two middle screws without arrow marking!) Now turn the remote control over

and take out the bottom with the printed circuit board. Now remove the used batteries and

replace them with two new ones of the same type (Lithium button cell 3V, type CR2032). Make

sure that the polarity of the batteries is correct when inserting them (marking "+" upwards),

otherwise the electronics may be damaged.