Aqua Creek Products AAC719 Operatör El Kitabı - Sayfa 6

Fitness Ekipmanları Aqua Creek Products AAC719 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Aqua Creek Products AAC719 8 sayfaları.

Once the cable has been completely strung on both sides, check that the bump stop on the truck

weight rails is 1-2 inches above the stop tube. This is to ensure there is proper tension on the

cable so that it does not pop out of any of the pulleys while in use. If adjustment is needed on

either or both sides, tighten or loosen the nut that is part of the hook where the end of the cable

is attached. See FIG. 4 below.

ProTone Main Wire Assembly

MAIN WIRE ROPE

ADJUST THIS NUT

TO ADD OR RELEASE

TENSION ON THE CABLE

BUMP STOP SHOULD BE 1-2 INCHES

ABOVE THIS STOP TUBE.

TRUCK WEIGHT RAIL

FIGURE 3

FIGURE 4

Revised 12/14/20