AVM EVOLUTION MP 3.2 Kullanım Talimatları Kılavuzu - Sayfa 9

CD Çalar AVM EVOLUTION MP 3.2 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. AVM EVOLUTION MP 3.2 20 sayfaları.

ü Switch on the device on the rear side of the unit (30). Wait until the device has started and went

into stand by mode. Now, switch it on with the power button on the front side (1).

ü After a brief starting process, your device automatically connects to your local home network and

is ready to be operated via the

ü Launch the RC S App on your smartphone or tablet. The RC S App will now automatically search

and list all available AVM devices in your local network with their respective device name and IP

adress (e.g. "192.168.xxx.x" etc.).

ü Choose an availbale device and wait until a connection is established.

Setting up a wireless WiFi connection

To set up your device with a wireless WiFi connection, you need to download and install the free

App for iOS and Android

refer to the installation process by use of the RC S App. For details on how to connect your device with

the RC 9 remote control, please refer to section 0. A detailed description of the entire functionality of

the RC 9 remote control and the

the respective product pages of our AVM website: www.avm.audio.

NOTE: Before using the wireless WiFi functionality of your device, an initial set-up of a wired LAN

connection is mandatory. This non-recurring step is required to set-up an initial WiFi connection

between your device and the RC S App via your local home network.

ü Please switch off your device on the rear side of the unit (30).

ü Plug a LAN cable from your local router into the LAN port of your device (25).

ü Switch on the device on the rear side of the unit (30). Wait until the device has started and went

into stand by mode. Now, switch it on with the power button on the front side (1).

ü After a brief starting process your device automatically connects to your local home network and is

ready to be operated via the

ü Launch the RC S App on your smartphone or tablet. The RC S App will now automatically search

and list all available AVM devices in your local network with their respective device name and IP

adress (e.g. "192.168.xxx.x" etc.).

RC S App for iOS and Android.

or use the optionally available RC 9 remote control. The following instructions

RC S App for iOS and Android

RC S App for iOS and Android.

can be found in a separate manual on

RC S