AVM EVOLUTION MP 5.2 Kullanım Talimatları Kılavuzu - Sayfa 8

CD Çalar AVM EVOLUTION MP 5.2 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. AVM EVOLUTION MP 5.2 20 sayfaları.

A detailed description of the entire functionality of the optionally available RC 9 remote control can be

found in a separate manual on the product page of our AVM website at www.avm.audio.

Pairing

In order to control your device with a RC 9 remote control, both components need to be linked first.

This process is also referred to as Pairing. To start the pairing process, please switch off your device

by using the mains switch (30) on the rear side of the unit. Now please navigate to the Systems

Settings menu on your RC 9 remote control by pressing the Settings key and navigate to the menu

item Start Pairing without selecting it with the Enter key yet. Switch on your device by using the mains

switch (30) on the rear side of the unit and immediately press the Enter key of your RC 9 remote

control to now start the Pairing process. The name of a succesfully detected device will

instantaneously be shown on the display of your RC 9 remote control and can be edited by using the

alphanumeric input keys of the RC 9 remote control. After confirming the name of the paired device

with the Enter key, you can also choose one of four available Hotkeys. Details on how to use the

Hotkey function of your RC 9 remote control can be found in a separate manual on the RC 9 product

page on our website at www.avm.audio. By pressing the Enter key on your RC 9 remote control again,

the pairing process is completed.

The RC S App for iOS and Android will turn your smartphone or tablet into an easy-to-use remote

control and provides a variety of intuitive features to get the most out of your network-enabled device.

The RC S App is available free of charge and can be downloaded from the

Apple App Store

and the

Google Play

Store. A detailed description of the entire functionality of the RC S remote control can be

found in a separate manual on the product page of our AVM website at www.avm.audio.

In order to use the variety of integrated streaming funtions such as Music Server (local NAS drives

etc.) or Online Services (TIDAL, Qobuz, Webradio, Podcasts) your device needs to be connected to

the internet via a router in your local home network. You can choose from a wired LAN connection (25)

or a wireless WiFi connection. In order to use the wireless WiFi connection of your device, the included

WiFi antenna needs to be installed first (23).

LAN vs. WiFi

Before using the wireless WiFi functionality of your device, an initial set-up of a wired LAN connection

is mandatory. This non-recurring step is required to set-up an initial WiFi connection between your

device and the RC S App via your local home network.

NOTE: To ensure a smooth WiFi operation of your device, it is highly recommended to remove the LAN

cable after the intial set-up process described in section 0 has successfully been completed. This is

because a wired LAN connection is always prioritized by the device which automatically leads to a

wired LAN connection as soon as a LAN cable is connected at a later time and the device has been

restarted by switching it off and on again via the mains switch on the rear side of the unit (30).

Please make sure to carefully follow all steps below to successfully set up a wired LAN connection or a

wireless WiFi connection.

ü Please switch off the device on the rear side of the unit (30).

ü Plug a LAN cable from your local router into the LAN port of the device (25).