Aqua Creek Products F-044SCH Talimatlar Kılavuzu - Sayfa 6
Akü Şarj Cihazı Aqua Creek Products F-044SCH için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Aqua Creek Products F-044SCH 16 sayfaları. 24v solar charger
Sayfayı Yazdır
Original Pro Pool & Ranger Installation
ORIGINAL
(OLD-STYLE)
PRO POOL
OR RANGER
REMOVE THIS
1/2" HEX BOLT
Installing the Solar Charger on an original-style Pro Pool/Ranger Lift;
STEP 1: Remove the 1/2" hex bolt from the baseplate as shown above.
STEP 2: Place the 24V Solar Charger over the baseplate of the lift as shown.
STEP 3: Align the mounting stud with the baseplate & anchor insert. Thread the mounting stud into the
anchor insert and tighten. Use a 1" wrench to make sure it is snug.
STEP 4: Run the BATTERY CABLE under the MAIN FRAME TUBE as shown. It will run to the CONTROL BOX,
and the CONNECTOR will plug into the control box.
(See INSTALLING THE CHARGE CONNECTOR).
6
Copyright © 2017 Aqua Creek Products All Rights Reserved
NOTE: MAKE SURE TO RUN
BATTERY CABLE ALONG
THE MAIN FRAME AND UP
THE ACTUATOR FRAME AS
SHOWN SO THAT THE CABLE
MOVES UP & DOWN
WITH THE LIFT.
MAIN FRAME
BATTERY CABLE
RUNS BACK ,
ALONG MAIN FRAME
& UP ACTUATOR FRAME
BEHIND CONTROL BOX
BATTERY
ACTUATOR FRAME
CONTROL BOX
CHARGE
CONNECTOR
PLUGS INTO
CONTROL BOX
THREAD INTO
ANCHOR INSERT
TIGHTEN WITH
1" WRENCH
Revised 12/4/17