AVM OVATION CD8D Kullanım Talimatları Kılavuzu - Sayfa 8

CD Çalar AVM OVATION CD8D için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. AVM OVATION CD8D 14 sayfaları. Cd-player/dac/cd-drive

Sayfayı Yazdır

3. Basic operation

3.1 Switching on / standby

Using the button power (1) You can switch between on (operate) and stand by. In the on state the display (8)

lights up and the LED (7) is off. In stand by mode the display (38) is off and the LED is on to indicate that the

unit is still connected to mains.

CAUTION: When switched to stand by the unit is still connected to mains. In case of thunderstorm or if You

leave the house for a longer time we recommend that You switch the amplifier off by using the mains switch

(27) or pull the mains plug.

3.2 Display

When the unit is on, the display shows information about the current settings and state of the CD8.

Lower line

Shows the settings of the internal upsampling circuitry: on the left side the actual samplerate and the number

of bits ("192/24"). On the right side the actual filter ("smooth" / "sharp").

Right side

On the right side in the middle the actual volume setting is displayed: "fgx", when fixed level is active or the

acutal volume in 0.5 dB steps from 0.0 to 100. (See also 4.2)

3.2.1 Display in CD player mode

Upper line

If not programmed: "TRACK". If programmed "PGM", actual program number and total program count.

Middle line

On the left side the actual track on CD and the number of available tracks. In the middle the total playing

time (while STOP) or the actual playing time (while PLAY or PAUSE).

3.2.2 Display in D/A converter mode (CD8, CD8T only)

Middle line

On the left side the name of the actual input. In the middle "NO SIGNAL" if the actual input has no valid

audio signal. If it has, the middle will be blank.

3.3 Insert / eject disc

Insert a CD

The CD8 has a slot-in CD drive. Insert the CD (coverside up) and push slightly. The drive will now

automatically draw the disc inside. After that the player reads the TOC and shows it on the display. Most left

is the number of the actual track followed by the total number of tracks on the CD (for example "1/17"). The

middle f the display shows the total playing time of the CD.

NOTE: If there is still a CD inside or the unit is in stand by, the slot will be blocked. If the inserted disc is not

readable (DVD, data-CD) the display will show "no playable disc"

Eject CD

Press the EJECT button (15). Then the disc will be ejected.

Auto-CD function

If CD is not selected as source he unit will automatically change to CD from any other input after you have

inserted a CD.