AvMap GeoPilot II Hızlı Kılavuz - Sayfa 9

GPS AvMap GeoPilot II için çevrimiçi göz atın veya pdf Hızlı Kılavuz indirin. AvMap GeoPilot II 13 sayfaları. Avmap geopilot ii: quick start

To increase/decrease the brightness use respectively up/down cursor key.

In addition the Time and the GPS State are shown.

1.5 SELECTING THE LANGUAGE

It is possible to select the language in which the information is displayed (for screen

labels, menus and options, but it does not affect the map information). The default

setting is English.

> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENTER' + "GENERAL SETUP" + 'ENTER' +

"LANGUAGE" +'ENTER'

Choose the language you want and press 'ENTER' again to confirm.

Information is keyed into the GeoPilot2 when editing a Waypoint, entering a Flight

Plan, using the calculator and searching the Database. When the field is highlighted:

- Enter or edit data by pressing up/down cursor key to step through the available

characters until the desired character is displayed.

- Press right cursor key to move the cursor to the right.

- Use left cursor key to move the cursor to the left. Some pilot-entered data requires

either a +, - or a hemisphere identification:

- Move the cursor over the displayed symbol and press up/down cursor key until the

desired symbol appears.

-Press 'ENTER' to continue to the next line or to return to the previous menu.

1.7.1 Use with Terrestrial Maps

The GeoPilot2 is compatible with AvMap terrestrial cartography : with a terrestrial SD

inserted the GeoPilot2 becomes a Geosat Drive

1.7.2 Full Geopilot2 Manual

You can downoad the full version of the Geopilot2 manual from our site www.avmap.

it in the support section.