Dexter Power NC500JS Kullanıcı Kılavuzu - Sayfa 13

Akülü Testere Dexter Power NC500JS için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dexter Power NC500JS 20 sayfaları.

Sayfayı Yazdır

JIG SAW

The numbers in the following text refer to the drawing on page 2.

WARNING -To reduce the risk of injury, user must read instruction manual. Save all warnings and

instructions for future reference.

Contents:

1 Machine data

2 Safety instructions

3 Assembly

4 Use

5 Service & Maintenance

Intended use

The machine is intended for making separating cuts and cutouts in wood, plastic, metal, ceramic plates and rubber while resting

firmly on the workpiece. It is suitable for straight and curved cuts having miter angles of up to 45°. Do not use machines, tools

and accessories for additional applications (see manufacturer's instructions) for works other than those for which they are

designed for. All other applications are expressly ruled out.

EQUIPMENT DESCRIPTION

Technical specification:

Type designation

Rated voltage

Rated power input

Speed, n

Cutting angle range

Cutting capacity

Blade type

suggestion:

1) wear glove during operation

2) limit operating time and shorten trigger time.

Contents of packing

1 Jig saw

1 Dust extraction adaptor

1 Hex key

1 Blade for wood

1 Instruction

manual (with 1 safety instructions and 1 guarantee card)

After unpacking, check the tool and accessories for damages and do not use the tool in case something is defective.

Features

Fig. 1

1. ON/OFF switch

2. Lock-on button

Dexter Power

Original Instructions

NC500JS Jig Saw

220V~ 60Hz

500W

0-2700/min

0-45°

Wood: 55mm Steel: 8mm

T SHAPE