Dexton DX-50438 Montaj Kılavuzu - Sayfa 6

Oyuncak Dexton DX-50438 için çevrimiçi göz atın veya pdf Montaj Kılavuzu indirin. Dexton DX-50438 8 sayfaları. Mercedes-benz 300sl w 198

Sayfayı Yazdır

Wheel insert (#12)

Hub cap (#15)

Wrench (#7)

10 washer (#11)

Screwdriver (#17)

M8 nut (#6)

M3.5x12 Pan head screw (#9)

wing mirror (#8)

Operation of the Vehicle:

1.Make sure the battery is fully charged. Remove the seat and connect the

red plug to the battery plug before first use.

2.Locate the direction switch to the right of the steering wheel. Press the

direction switch to "F" and press the accelerator pedal, vehicle will move

forward. Headlights come on while moving forward.

3.To stop the vehicle remove foot from accelerator pedal. When stopped press

the direction switch to "B" then press the accelerator pedal, vehicle will move

backward.

NOTE: Do not change directions while vehicle is in motion.

4.Press the button in the center of the steering wheel for horn sound.

Charging the Battery:

10 washer(#11)

rear axle

rear axle spacer (#2)

Rear wheel (#10)

· The Socket for charging the battery is

located next to the seat.

· Connect the charger plug into the DC jack,

then plug the charger into a household

outlet.

· Charge the battery for 8-10 hours. Never

charge more than 20 hours.

· When the battery is fully charged, unplug the

charger and store it in a cool and dry place.

Step 5: Rear Left Wheel Assembly

· Insert onto the rear left axle: M10

washer (#11), the rear axle spacer

ZDVKHU UHDU ZKHHO

ZKHHO LQVHUW

washer (#10) and M8 nut (#6).

· Tighten the nut with wrench (#7).

Insert the hub cap (#15) onto the

wheel.

· Tighten with 3xM3.5x12 pan head

screws (#4) with screwdriver (not

included).

Step 6:

· Insert the wing mirror (#8) into

the body.