Avnet AES-ACC-U96-ONCAM-MEZ Başlangıç Kılavuzu - Sayfa 2
Kontrol Ünitesi Avnet AES-ACC-U96-ONCAM-MEZ için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Avnet AES-ACC-U96-ONCAM-MEZ 7 sayfaları. 96boards on semiconductor dual camera mezzanine
Sayfayı Yazdır
Overview
The 96Boards Dual Camera Mezzanine is an accessory for the the Ultra96-V2 and ships with two IAS
camera modules pre-installed. To utilize the out of box image that will demonstrate camera functionality
you must mate the camera mezzanine board to an Ultra96-V2 (not included). For initial setup or if the
microSD card has been erased or reprogrammed, then use the instructions included in this tutorial to restore
the microSD card to the latest factory image.
Setup
Software
The software required for this tutorial is:
•
Etcher --
•
Decompression utility, such as 7-zip
Hardware
The hardware setup used to test this reference design includes:
•
Host machine compatible with Etcher
•
16 GB microSD card
•
microSD adapter (to full-size SD or USB) that is compatible with your host machine
•
Ultra96-V2
•
96Boards Power Adapter, such as Avnet AES-ACC-U96-4APWR
•
ON Semiconductor Dual Camera Mezzanine
•
2 image sensors installed (included from the factory)
•
1080p monitor
•
Cable to connect Ultra96-V2 to the monitor (DP connector on Ultra96-V2)
•
USB keyboard
https://etcher.io/
Page 2