AB Quality MobileView Guard G750 Hızlı Başlangıç Kılavuzu - Sayfa 12
Dokunmatik terminaller AB Quality MobileView Guard G750 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. AB Quality MobileView Guard G750 20 sayfaları.
Sayfayı Yazdır12
MobileView Guard G750
MobileView Junction Box Mounting and Wiring
The MobileView Junction Box (2727-MRJB1) integrates the MobileView terminal
into the control system and is mounted on a DIN rail.
S1
RJ-45 jack for connecting the MobileView data lines.
S2
9-pin DSUB female connector (for future use).
S3
RJ-45 jack to Ethernet network.
X1
12-pin male connector for connecting Junction Box Cable.
X2
12-pin male connector (shipped with female terminal block connector) for connecting the:
Pin 1, 24V dc
X1
(with Female
Terminal Block
Connector K3)
Pin 1, 24V dc
X2
(with Female
Terminal Block
Connector K4)
Grounding
Screw
ATTENTION
!
Publication 2727-QS002E-MU-P
• 24V dc power supply
• emergency stop switch
• enabling switches
60 mm (2.36 in)
24V D C
ON LY
+24V
TER M I N AL I N
GND
ES1+
S1
ES1-
ES2+
ES2-
ED1+
ED1-
ED2+
ED2-
R S422 OUT
S2
+24V
GND
ES1+
ES1-
ES2+
ES2-
ED1+
ED1-
ED2+
ED2-
ETH ER N ET O U T
S3
The Junction Box and the MobileView terminal meet the safety
class III in accordance with EN 61131-2 and EN 50178.
When connecting the terminal, make sure all voltages
connected to the MobileView terminal are safety extra low
voltages by using a safety transformer or a similar facility.
150 mm (5.91 in)
108 mm (4.25 in
DIN Rail Latch
Grounding
Strain Relief
Screw