AB Sciex API 3200 System Donanım Kılavuzu - Sayfa 9
Laboratuvar Ekipmanları AB Sciex API 3200 System için çevrimiçi göz atın veya pdf Donanım Kılavuzu indirin. AB Sciex API 3200 System 20 sayfaları. Fully-integrated triple quadrupole mass spectrometer
Sayfayı Yazdır
The Instrument Status lights indicate the status of the instrument vacuum. When
the operational vacuum conditions are satisfied and the instrument is in analysis
mode, the Ready light (green) is illuminated and the Fault light (red) is
extinguished. The Fault light flashes when a vacuum fault is detected. In Pump-
Down mode, the Ready light flashes for the duration of the sequence.
Directly below the source housing is a set of conveniently integrated sample
introduction features. An integrated switching valve with associated Load and
Inject buttons (marked A and B, respectively) can be used as a manual injector
when optimizing for an analyte using FIA, or for diverting LC flow when any
precipitate or salts initially come off the LC column. Below that, an integrated
syringe pump is available for infusing standards when calibrating the instrument
or optimizing for an analyte.
Integrated
Syringe
Pump
Figure 1-6 Sample introduction features and status indicators
I/O Panel
The input/output panel is located at the center back of the chassis. This panel
contains several connection ports for the system:
Document Number: D1000092204 B
Integrated
Switching
Valve
A
LOAD
INJECT
INSTRUMENT STAUS
FAULT
INSTRUMENT STATUS
FAULT
READY
•
The IEEE-488 (GPIB) port provides a connection to the system's computer.
B
A
B
LOAD
INJECT
READY
Hardware Guide
9