Aqua Free AS Fill season Kullanım Talimatları - Sayfa 2

Su Sebili Aqua Free AS Fill season için çevrimiçi göz atın veya pdf Kullanım Talimatları indirin. Aqua Free AS Fill season 2 sayfaları.

Sayfayı Yazdır
2 Scope of supply and accessories
4
1
2
2
Replacement filter
AS Fill season bacterial filter: Single filter for filter changes, separate purchase
Optional accessories
•
Shut-off valve (A)
•
Tank lid adapter 1 (B) – Universal tank lid adapter with overflow protection; exterior Ø approx. 74 mm,
supports Ø approx. 64 mm
•
Tank lid adapter 2 (C) – Universal tank lid adapter with overflow protection for various brands, e.g.
Dethleffs, LMC, TMC models; exterior Ø approx. 77 mm, supports Ø approx. 65 mm
•
Angle adaptor (D)
Shut-off valve (A)
Tank lid adapter 1 (B)
3 Preparing the filter for first-time use
•
Remove the filter from the external packaging.
•
Screw the connector (2) to the thread ends of the filter
(ensure the correct position of the sealing ring).
•
Attach a sealing cap (3) onto each of the
connectors to prevent contamination.
Scope of supply
5
AS Fill season set with case:
Storage case with basic accessories
and bacterial filter
1 AS Fill season filter
2 2 x G 1/2" connectors
3
3 6 x sealing caps
4 Filling hose with adapter
5 Hose adapter for 13 mm G½" hose
Tank lid adapter 2 (C)
Angle piece (D)
2
3
4 Handling the filter
•
Use a hose with an appropriate adapter to connect the filter.
•
If a suitable adaptor is not fitted, use the supplied hose
adapter (5). Attach it to the hose and secure it tightly to
avoid leaks.
•
Remove the sealing caps from the filter connectors and store
in a safe place.
•
Connect the filter inlet connector to the hose adapter (5).
Please note the flow direction of the filter (see arrow on the filter).
•
Connect the filling hose (4) to the filter outlet connector and
insert the open end of the hose into the tank.
•
Alternatively, to use the tank lid and angle adaptors (available
as optional accessories) screw the tank lid adapter to the tank
inlet and then connect the angle adaptor to the filter outlet.
•
Turn on the water supply and start filling the tank.
•
Once the tank is full, turn off the water supply, disconnect the
filter from the hoses and drain briefly.
•
Use the sealing caps to seal the filter inlet and outlet in order
to prevent water from leaking out and put the filter into the
storage case for a safe keeping.
•
Ensure that the filling hose and other accessories are as dry as
possible before putting them too into the storage case.
Important information, please note:
•
After using the filter for the first time, it should be used regularly,
i.e. at least every 2-3 weeks. If the tank is not filled this frequently,
the filter should be rinsed for 1-2 minutes (noting the flow direction)
under a cold tap.
•
In your own interests, always keep the filling hose, accessories and sealing caps as well as the
filter outlet clean and make sure that they are not left on the ground. This will ensure that the
filtered water kept is free of contamination.
•
Protect the filter from frost.
•
Protect the filter from damage and do not let it fall.
Recommendations: If the camper van or boat is not used for a longer of time, the drinking water
system should be drained in full. When using your own hose, it should be dried optimally after use.
We recommend flushing the supply hose thoroughly before connecting the filter.
Flow direction
Inlet side
Flow direction
Outlet side