Aqua Lung EB001003 Kullanıcı Kılavuzu - Sayfa 5

Dalış Aleti Aqua Lung EB001003 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Aqua Lung EB001003 20 sayfaları. Survival egress air

GENERAL PRECAUTIONS AND WARNINGS

WARNING:
variety of vests and harnesses typically used in maritime environments and
may also be considered for egress from rotorcraft in a ditching emergency.
Due to its limited air volume, it is not intended for use while SCUBA diving
or egressing from depths greater than 4m.
WARNING:
training which simulates an emergency egress situation. You must also
learn the basic principles and techniques for breathing compressed air
underwater. Use of SEA without proper training is dangerous and can
result in serious injury or death.
WARNING:
performed by a manufacturer trained service technician according to the
procedures outlined in our technical manual once every two years under
normal prescribed use OR once a year if operating in an environment
where harsh / heavy / in-water or training use may exist.
WARNING:
pressure at any temperature.
WARNING:
exceeding 121°C or open flame. Instead, discharge the cylinder completely
and return it to a manufacturer trained service technician for inspection.
WARNING:
atmospheric, compressed air (21% oxygen and 79% nitrogen by volume).
DO NOT attempt to fill with other gases, including pure oxygen or air
which has been enriched with oxygen exceeding 21% in content. Failure
to observe this warning may result in serious injury or death due to fire
and explosion or the serious deterioration and failure of the equipment.
WARNING:
cause permanent damage to certain plastic components.
WARNING:
essential that the care and maintenance procedures laid out in this
manual are adhered to. Failure to do so may cause permanent damage.
Any damage to the protective coatings will cause premature corrosion of
critical safety components. As part of the care and maintenance, regular
and frequent inspections for corrosion must take place.
SEA (Survival Egress Air) is specifically designed for use on a
Before using SEA, it is important to receive in-water survival
It is imperative that manufacturer prescribed service on SEA is
DO NOT attempt to overfill SEA beyond its maximum fill
DO NOT fill or use SEA if it has been exposed to extreme heat
SEA is designated to be compatible for use only with normal,
DO NOT apply any type of aerosol spray to SEA. Doing so may
Due to the materials used in the construction of SEA it is
5