Aqua Lung CORE Servis Kılavuzu - Sayfa 14
Kontrolör Aqua Lung CORE için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Aqua Lung CORE 18 sayfaları.
Sayfayı Yazdır
- 1. Table of Contents
- 2. Copyright
- 3. Introduction
- 4. Warnings, Attention, Notes
- 5. Maintenance
- 6. General Instructions
- 7. General Conventions
- 8. Disassembly Procedure
- 9. Reassembly Procedure
- 10. Controle Final
- 11. Final Reassembly
- 12. Appendix
- 13. Procedure a - Cleaning and Lubricating
- 14. Maintenance Notes
Table 3. Recommended cleaners and lubricants
LUBRICIANT / CLEANER
Christo-Lube MCG 111
Oakite #31
NETALU
Diluted white vinegar
Washing-up liquid (diluted with hot water)
Disinfectant STERANIOS 2%
nd
Service Manual Core 2
Rev. 05/2015
APPLICATION
All O-rings
ATTENTION: Silicone parts do not require lubrication. Do not grease them. Greasing
silicone parts can change their molecular construction and cause premature
degradation of the material.
Acid bath for cleaning brass and stainless
steel parts
Acid bath for cleaning brass and stainless
steel parts
Acid bath for cleaning brass and stainless
steel parts
ATTENTION: Do not use hydrochloric acid for cleaning parts. Hydrochloric acid, even
when well diluted, attacks the coating of metal parts and leaves a corrosive deposit that
damages plastic parts and O-rings.
Degreases brass and stainless steel parts;
general cleaning of plastic and rubber
parts
Disinfectant for all plastic and metal parts
stage
Service Manual Core 2
SOURCE
Aqua Lung, ref. 480025
Oakite Products, Inc.
Aqua Lung, ref. 455001
Household stores
Household stores
Aqua Lung ref : 382062
nd
stage
14