AVOCOR AVE Series Hızlı Başlangıç Kılavuzu - Sayfa 13
Dokunmatik panel AVOCOR AVE Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. AVOCOR AVE Series 16 sayfaları.
Sayfayı YazdırEnabling the Touch Screen
Before setting up your display to support touch screen capability, ensure that:
The touch screen controller host computer is turned off.
•
The display is turned on.
•
•
The video output from the computer is connected to a video input on the display.
Connecting the Display to a Host Computer
1.
Connect the signal cable to the display, and then turn on the display.
2.
Connect the USB Cable (USB Type-A connector) to the display.
3.
Connect the other end of USB cable (USB Type-A) to the USB port on the laptop/ PC.
See picture below.
4.
Then turn on the computer.
5.
When USB cable is fully connected, wait for 5 seconds and the touch function is
ready. It can be activated by using the stylus or finger.
v.08_08_2018
13