Aqua Medic Ocean Runner 3500 Kullanım Kılavuzu - Sayfa 2

Akvaryumlar Aqua Medic Ocean Runner 3500 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Aqua Medic Ocean Runner 3500 14 sayfaları.

1. Description of the system

The water is flowing from the aquarium via an overflow chamber or another

overflow device into the biological trickle filter modules. Here the water is

treated biologically. The trickle filter modules are filled with Bactoballs. Their

special shape creates a lardge surface for settling of bacteria. Below the trickle

filter modules a layer of filter sponge is placed.. The task of this layer is mainly

to reduce the noise of dripling water falling from the trickle filters into the clear

water chamber. Apart of the inflowing water, adjusted by a valve, is directed to

the protein skimmer. From the clear water chamber the water is driven to the

circulation pump. This pump is set up dry, besides the filter. The pump is not

included. We recommend to use the

a capacity of 3500 l/h. A small bypass of the water ( 1 – 3 l/h) is delivered to the

Nitratreductor.

2. Components of the filter system

The undercounter filter system is placed in a separate glass tank with two

sliding doors.

dimensions: 56 x 36,5 x 58 cm. On the long side, you have to add minimum 15

cm for piping. The filter consists of the following components:

- Glass tank, dimensions 56 x 36,5 x 58 cm to take the filter modules

- 3 trickle filter modules, filled with Bactoballs

- 1 Nitratreductor

- 1 protein skimmer with venturi pump

set up:

view from

top

1. Inlet

2. Trickle filter modules

3. Nitratreductor

4. Circulation pump

5. Water inlet with drip counter (Nitratreductor)

6. protein skimmer

7. post filter /activated carbon

8. water outlet

Ocean Runner 3500 with