Avol AS6000BW Kullanıcı Kılavuzu - Sayfa 10
Konuşmacılar Avol AS6000BW için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avol AS6000BW 15 sayfaları. Bluetooth soundbar system with wireless subwoofer
Sayfayı Yazdır
User instructions
Bass enhancement
1: To increase the bass level press the BASS (B)+ button
(29) repeatedly.
BASS
2: To decrease the bass level press the BASS (B)-
button (29) repeatedly.
NOTE: The BASS levels range from -4 to +4.
Mute function
1: Pressing the MUTE button (30) on the remote will
temporarily silence the audio output. You will see
'MUTE' flash on the display to indicate the mute
function is active.
BASS
2: Press the MUTE button again to resume the audio
output.
The unit can be set to enter STANDBY mode after a
period of time.
1: During playback mode, press the SLEEP button (27)
to enter the timer settings.
2: Press the SLEEP button repeatedly to cycle through
the available time duration options of :-
45, 60, 90 minutes & OFF.
BASS
3: When you have selected the required timer duration,
just leave all buttons untouched for 2 seconds and the
timer will begin the countdown.
Sleep timer (cont)
4: When the timer elapses the STANDBY mode will be
activated.
Adjusting the display brightness
1: Press the DIM. button (28) repeatedly to cycle through
the 3 brightness states LOW, MED & HIGH.
MUSIC
Bluetooth operation
Pairing a Bluetooth device
Before you can use the sound bar with your phone or
other Bluetooth capable device you will need to pair
the device to the sound bar.
NFC Compatible Smart phone
1:
Enable NFC on your smart phone (see the user
manual of your phone).
2:
Touch the smart phone to the NFC mark on the
unit and maintain contact until the smart phone
responds.
MUSIC
If prompted for a confirmation, enter
or'confirm'
You' ll hear a beep sound from the unit if
Bluetooth is connected.
3:
To disconnect the established connection,
touch your smart phone to the NFC mark
on the unit.
Non-NFC Compatible devices
1: Press the SOURCE button (2, 22) repeatedly until you
see 'BT' appear on the display.
5, 10, 15, 30,
MUSIC
2: When selected, the 'BT' text on the display will flash
while the unit tries to connect to previously paired
devices. If no devices are found the 'BT' text will
still flash but to indicate it is ready for pairing
a new device.
3: Enable the Bluetooth function on your smart phone
and search for a device labelled 'AS6000BW' in
the available list.
9
.
BASS
MUSIC
'yes'