CP CPL40 Kullanım ve Bakım Talimatları - Sayfa 6

Mikser CP CPL40 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları indirin. CP CPL40 19 sayfaları. Planetary mixer mechanical speed variation

Sayfayı Yazdır

ELECTRICAL

PANEL

GRID

PROTECTION

INSTRUCTIONS FOR USE

To be able to work; the bowl must be mounted and the bowl protective grid closed. Otherwise it will be

blocked by the safety systems.

DO NOT REMOVE OR TAMPER WITH THE ELECTRICAL OR MECHANICAL GUARDS OR SAFETY

DEVICES ON THE MACHINE.

The bowl must be in position BEFORE the tools. It must be inserted with the bowl

lever down, putting the bowl plate, placed at the back of the bowl, on the bowl lifting

arc.

Complete positioning by having the holes on the bowl support plates match with

the centering pins. Block the bowl with the handles.

If it was not previously done, rotate the protective grid of the bowl

to the open position and, after having chosen the tool, insert it

into the tool holder shaft. Once it is inserted, turn the tool

clockwise, having the transmission pin enter the work position as

indicated in the figure. Lower it and insert the tool lock ring.

Using the arrows

protective grid of the bowl. At this point, after inserting the ingredients, start the work cycle.

Instruction manual CPL-40

and ê

, on the control panel to lift the bowl to the working position and close the

SPEED

CHANGE

BOWL

LOCKING

HANDLES

6 of 19