Avonic CM-CON100 Kullanıcı Kılavuzu - Sayfa 10

Kontrolör Avonic CM-CON100 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avonic CM-CON100 12 sayfaları. Ptz camera controller
Ayrıca Avonic CM-CON100 için: Kullanıcı Kılavuzu (10 sayfalar), Kullanıcı Kılavuzu (13 sayfalar), Kullanıcı Kılavuzu (11 sayfalar), Kullanıcı Kılavuzu (16 sayfalar)

Protocol setting

Baud rate setting

Address Setting

Increment

The controller can also batch program cameras in the system. It will set the same baud rate,

protocol for the 10 cameras next to the current one while the cameras' address to be increased by

increment number sequentially. After step 5, press SHIFT to enter menu "INCREMENT:" Input a

The address increment between two sequential cameras. For example, the current camera

address is 1 and the increment is 2, then the next camera address is 3.

2. Time Setting

Set time in 24 hour

format.

3. Volume Setting

4. Backlight Setting

5. Sleep Setting

6. PIN setting

www.avonic.eu

number within 1~20, press ENT to confirm.

TIME SETTING 

10：52：59

VOLUME SETTING



BACKLIGHT MODE



SLEEP SETTING 

PIN SETTING 

PELCO D/PELCO P

PROTOCOL：

/VISCA

PELCO D

2400/4800/9600 /

BAUD RATE：

19200/38400

2400

0-255

ADDRESS: 1

1-20

INCREMENT:

OFF (switch off sound)

1~6 (6 levels from low

to high)

AUTO/ON/OFF

OFF/ 30S/ 1M/

5M/10M / 30M/60M

USER/ADMIN