Billet Specialties 13800 Kurulum Kılavuzu - Sayfa 7

Motor Billet Specialties 13800 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Billet Specialties 13800 20 sayfaları. Small block chrysler

2-7/16" From Timing Cover

2" From Timing Cover

Figure 2: Install Block Mounting Studs

Apply RTV silicone to one end of the threads of the four 3/8-16 x 5-1/2"

threaded studs and the two 3/8-16 x 2-1/2" threaded studs.

A] Thread the silicone side of the 5-1/2" long studs into the upper four

holes in the timing cover.

Important! Leave 2-7/16" of thread exposed from the timing cover face.

B] Thread the silicone side of the two 2-1/2" long studs into the bottom

two holes of the timing cover.

Important! Leave 2" of thread showing.

Double check your lengths.

The studs can easily be tightened by threading two 3/16" zinc coated

nuts (supplied) onto the stud and tighten them against each other to act

as a drive nut (discard after use).

*Example