Aqua One Monarch 100 Montaj Talimatları - Sayfa 4

Evcil Hayvan Bakım Ürünü Aqua One Monarch 100 için çevrimiçi göz atın veya pdf Montaj Talimatları indirin. Aqua One Monarch 100 4 sayfaları. Aquarium

Sayfayı Yazdır

Step 6

cover

hood

light

glass tray

heater

canister

filter

Important Notice

It is absolutely imperative that you ensure this cabinet and aquarium is installed upon level flooring. It is also a prerequisite that

you ensure the flooring upon which it is positioned is able to support the weight of this aquarium which could be up to 600kg

including water and decorations.

Installation upon uneven flooring will result in poor distribution of weight. Damages to the aquarium, cabinet or equipment and

damages caused by leaks due to improper or uneven installation are not covered by the guarantee with this product.

Care and Maintenance of your Aqua One Aquarium

Glass: It is recommended that you use a good quality glass cleaner and a non abrasive lint free cloth. Glass cleaner should only

be used on the outside of the aquarium.

To clean the glass on the inside of the aquarium, it is recommended that you use an Aqua One Scraper or Magnetic Cleaner

(available from your local Aqua One dealer).

Cabinet and Hood: The use of a damp cloth is recommended, do not use any detergents or harsh chemicals to clean the cabinet

and hood as damage may occur.

Precision Manufactured in the P.R.C.

Designed in Australia by Aqua One

Distributed in Australia by:

Kong's (Aust.) Pty. Limited

48 Williamson Rd. Ingleburn.

2565 NSW Australia.

Aqua One and Kong's are registered trademarks. www.aquaone.com.au.

Distributed in New Zealand by:

Kong's (NZ) Limited

52 Glenlyon Avenue.

Greerton. Tauranga New Zealand.

Place the aquarium on top of

cupboard by lifting it on from

the back and sliding it forward.

VERY IMPORTANT: DO NOT REMOVE THE

POLYSTYRENE ATTACHED TO THE BOTTOM

OF THE AQUARIUM!

Install Filter (see filter instructions for details)

Install Heater (see heater instructions for details)

Put glass tray

on top of aquarium.

Install reflector lighting (see lighting instructions

for details)

Slide hood

onto aquarium. Insert maintenance

lid

into the hood.

Distributed in the UK by:

Kong's (UK) Ltd.

C/O Aqua Pacific UK Ltd.

PO Box 268

Romsey Hampshire

S051 0WW

United Kingdom

Aqua One 2004

Instruction version:- 22/02/2008